In this section you will find all those parts and accessories supplied in industrial weighing equipment DINAKSA brand.
Batteries, chargers, covers, methacrylates, antennas, etc. All this and much more is available in this section.
Requests information on the device and parts you need.
WIND-800 anemometer works with winds up to 120km/h. It has three potential free relays configured by the customer. It has three programming buttons.
DK original remote control - REMOTE CONTROL
Carga máx.: 0 a 6.525 kg. Limitador mecánico de carga especialmente indicado para prevenir sobrecargas en Grúas puente de un carro, doble carro, doble gancho,... Elevadores, ...
El limitador electrónico de carga LIM-E725 evita las sobrecargas que se producen en los aparatos elevadores, grúas-puente, grúas, polipastos, elevadores, etc. Posee una ...
The INC-100 inclinometer is the ideal solution to measure and/or verify a precise inclination of the steel cables of overhead cranes, gantries, elevators or load movement ...
Crane registration and control system. Electronic equipment for collecting data from the sensors installed on the cranes: load limiters, inclinometers, anti-collision, ...
Célula de carga tipo Flexión DKSK-P especialmente diseñada para pesaje en silos, con soporte antivuelco incorporado.
Célula de carga tipo Flexión DKSK-M especialmente diseñada para pesaje en silos, con soporte antivuelco incorporado.
In this section you will find all those parts and accessories supplied in industrial weighing equipment DINAKSA brand.
Batteries, chargers, covers, methacrylates, antennas, etc. All this and much more is available in this section.
Requests information on the device and parts you need.
Célula de carga tipo Flexión DKSK-G especialmente diseñada para pesaje en silos, con soporte antivuelco incorporado.
DKDCO LOAD CELL. From 3 up to 25 t. Load cells specially designed for load control in silos, with incorporated anti-overturn support. A double shear load cell, built in alloy ...
DKDCO LOAD CELL. From 3 up to 25 t. Load cells specially designed for load control in silos, with incorporated anti-overturn support. A double shear load cell, built in alloy ...
DKDCO LOAD CELL. From 3 up to 25 t. Load cells specially designed for load control in silos, with incorporated anti-overturn support. A double shear load cell, built in alloy ...
DKDCO LOAD CELL. From 3 up to 25 t. Load cells specially designed for load control in silos, with incorporated anti-overturn support. A double shear load cell, built in alloy ...
DKCF LOAD CELL from 15 up to 1.500 kg. Cells designed to work in overhang, with flexion or shear sensor, depending on capacities. Equipped with high mechanical strength ...
DKBP - 2093 LOAD CELL. Compression load cell with offset load insensitivity, low profile design with shear sensing element.
DKBP - 2093 LOAD CELL. Compression load cell with offset load insensitivity, low profile design with shear sensing element.