Dinaksa pesaje offers you a rental service of different weighing equipment at your disposal.
Our customers require having a high number of machines to facilitate the process in certain moments such as inventories. Dinaksa pesaje has a wide range of...
WIND-800 ANEMOMETER
WIND-800 anemometer works with winds up to 120km/h. It has three potential free relays configured by the customer. It has three programming buttons.
|
Download product data sheet |
 |
Technical characteristics
The blade has dimensions of 150mm in height and a turning diameter in the cups of 130mm, approximately.
Inside it has a toothed wheel to be used with an electronic photoswitch and in this way to obtain pulse trains, which after processing will indicate the wind speed.
The electronic control card must be powered by a 12Vdc source and the data is sent through the possible means of communication: CANBus (standard mounting) or RS-485.
In addition, it has a heating resistance, to increase the internal temperature, in the event that the ambient temperature is below 0º. This resistance reacts and acts.
Supply voltage: 100-240Vac / 50Hz-60Hz
(Optional 48Vac and 24Vac/Vdc)
Relay Output Speed 1 and Speed 2 (programmable)
Maximum effective voltage: 250Vef
Maximum effective current: 6A.
Note: These outputs must attack a resistive type load, or loads with little capacitive or inductive effect.
